Electric Fireplace Wall Hanging Ideas
The wall-mount electric fireplaces are ready to use straight from the box. These fireplaces can be an excellent way to add ambiance to your home without the need for renovations or venting.
They are typically heavy and require careful installation. Follow these steps to set up your new electric fireplace correctly.
1. Connect the Brackets
A wall-mounted or recessed electric fireplace instantly improves the look of any room. This is a great solution for those who don't have a fireplace or live in apartments.
Decide where you want to place your electric fireplace. It's crucial to select an area that isn't vulnerable to moisture and is at a minimum of a few inches away from drapes, furniture, and high traffic areas. Mark the wall with layout marks to indicate the top and bottom plates for the fireplace frame.
Use a tool such as a drill to drill exploratory holes into the wall, examining for studs with a stud detector and marking on the drywall for the locations of the fireplace mounting brackets. Then, you can build the wall or patch and paint the drywall to prepare it for fireplace installation.
Depending on your chosen wall-mounted fire, you might be required to install the screen and firebox as one unit or separate them by a wall bracket. If you aren't sure of your ability to finish this project, hire a general contractor or a seasoned carpenter.
You can find a template included with most electric fireplaces. However, you should also keep a level in your pocket and a pencil to mark the exact location where the wall brackets will be installed. Before drilling, make use of the template to verify that the power cable of the fireplace can be able to connect from the installation site to an outlet nearby to plug it in.
Install the drywall as clean and as flush as is possible to give the fireplace a clean look. Add a trim piece to the bottom edge and then sand and paint the entire frame for an elegant look.
You will need to insert the slots or hooks on the back of many electric fireplaces mounted on walls into the brackets that mount them. Make sure that the slots or hooks are aligned before connecting the fire to the wall brackets. Once the fire is in position you can then add additional elements like crystal embers driftwood log pieces or decorative rocks.
2. Check the Bottom Bracket
The space above the mantel, fireplace, or chimney breast is a great spot to hang artwork. But, there is a fine line between an artistic arrangement and one that detracts from the overall look of the fireplace design.
A common rule is that a photograph should be 80percent of the length of the mantel or fireplace it's placed on. This will keep it proportionate and will make it look nice on the wall. Other decorative ornaments and accessories placed on the mantel could influence the size and proportional guideline.
If you're going to hang a photo above your electric fireplace, you must ensure that the frame is made of glass or another material that is able to withstand high temperatures. If you're unsure whether the frame is suitable, you can test the frame using a heat-sensitive cloth to see if it is suitable for this type of installation.
The most common issue with hanging pictures over an open flame is the risk of damage to the artwork by smoke or other heat sources. Although this is rarely an issue when using a traditional wood or gas-powered fireplace, it's worth checking the recommendations of the manufacturer if you're planning to use an electric fire that is wall-mounted.
Most electric fires come with an attached bracket that can be attached to the wall with either hanging screws or a wall-mounted fixing system. If the latter option is used, it is recommended that you drill exploratory holes in a distinct area of the wall before you attempt to mount your electric fire. After that, you can use a cable finder and pipe to check that there aren't any cables or pipes in the vicinity of the location you've chosen to mount it.
If there are there are, you may choose to mount your fire on top of the electrical socket or move it to a new location. If you move it to a new spot it is important to ensure that the power cable can be able to connect from the fire to the electrical socket. this is particularly important for older homes or homes with solid walls. If you don't, your electric fireplace won't work properly. Some models come with templates that show you the locations to drill holes, while others require an apex level and pencil to mark the location on your wall.
3. Connect the Power Cord
You may have to move your plug socket in front of the fireplace if you've installed a fireplace that is recessed. This will give you an elegant look. Test the fireplace first to ensure it functions correctly.
A third popular way to mount an electric fireplace is to frame the space and then build it into the wall. This gives it a finished traditional look and also allows you to build a mantel. The owner's guide for your particular model will give details regarding framing, wiring and securing the fire place.
When you're ready to mount your new wall-mounted electric fireplace, start by marking the area of installation using a marker or pencil. Then apply a carpenter's level to ensure that the location is level and flat. You can also employ a stud finder to mark the location of studs, so that you know that you're drilling in a safe spot.
After you've marked the location of the installation, use your electric drill to create holes for the hanging screws or bracket screws. Be sure to adhere to the exact directions in the owner's guideline for this procedure, especially if you're installing the fireplace in wall. If you're not sure of how to do this you can always ask a professional to handle the installation for you.
You can also hide power cords away from view using cable organizer kits. These kits usually include sleeves, clips, or boxes to bundle cables. You can also use fish tape or wire snake tools to help guide the cords along the wall. If you don't want to cut the drywall, a powerbridge kit can offer a cleaner and safer connection.
You can also camouflage cords by using paintable wire covers or by tacking them to the wall. Be sure to keep the cover or tacks away from the source of heat however. This will shield the cord from being damaged and will also prevent accidental contact.
4. Connect the adapter
A wall-mounted electric fire place is a great option for home renovations or for those who don't have the space or money to build gas fireplaces. They are easy-to-hang and are ready to use straight out of the box. They're a great alternative for those who want a stylish, modern touch or warmth from a fireplace. They can be hung on any wall, just like artwork, and they're electric and have fan-powered heat.
Before you begin the actual installation process it is an excellent idea to gather all the equipment and tools you'll need. Read the user's manual to find specific instructions about how to install your electric fire. Some models might require you to attach the brackets directly onto the wall, while others may include an adjustable mounting plate that can slide into slots or hooks attached to the brackets used for mounting. It is crucial to eliminate any combustible materials from the area where you are installing a recessive unit. As Wall Mounted Electric Fires of thumb the materials should be kept 3 feet away from the front side of the fireplace and 1.5 feet from its sides.
After you have checked all the parts, connect your electric fire and verify that it's working. This is an important step, as it will ensure that the flame effect screen and heater operate exactly as they were intended to. This will give you a clear idea of the final product's final state.
Cover the cord when you are satisfied that it's working correctly. This will help to keep the final product neat and tidy. You can achieve this by installing a new outlet with the cord that is placed behind the unit. This will provide an elegant finish to your fireplace.